Product Overview: Corning Cable Systems’ OptiFit ® Assembly is specifically designed to connect the Optical Network Unit (ONU) to the optical drop cable. This unique patented design provides the end-user the ability to configure the system with preconnectorized cables dropped at the node location. The OptiFit assembly unit is composed of two parts, the furcation unit and the fitting. The furcation unit terminates the cable with an epoxy stub and supports two to twelve fibers. The fibers are fanned out with 900 µm, 2 mm or 3 mm subunits, depending on the amount of protection needed (3 mm protection is offered on cables with two to six fibers only). The metal fitting encloses the epoxy and links the furcation unit to any hardware, providing a 5/8-inch threaded input port.
Features
FC/APC Connectors
• Eliminates additional splice points and hardware at the node location
• Provides protection against inside and outside water penetration
• Withstands pull-out force up to 400 lb
• Provides maximum clearance inside the hardware
• Available with a variety of connector type
Condition: New
Product Overview: Corning Cable Systems’ OptiFit ® Assembly is specifically designed to connect the Optical Network Unit (ONU) to the optical drop cable. This unique patented design provides the end-user the ability to configure the system with preconnectorized cables dropped at the node location. The OptiFit assembly unit is composed of two parts, the furcation unit and the fitting. The furcation unit terminates the cable with an epoxy stub and supports two to twelve fibers. The fibers are fanned out with 900 µm, 2 mm or 3 mm subunits, depending on the amount of protection needed (3 mm protection is offered on cables with two to six fibers only). The metal fitting encloses the epoxy and links the furcation unit to any hardware, providing a 5/8-inch threaded input port.
Features
FC/APC Connectors
• Eliminates additional splice points and hardware at the node location
• Provides protection against inside and outside water penetration
• Withstands pull-out force up to 400 lb
• Provides maximum clearance inside the hardware
• Available with a variety of connector type
See More
Checkout now
Are you an Amazon customer? Pay now with address and payment details stored in your Amazon account.
Product Overview: Corning Cable Systems’ OptiFit ® Assembly is specifically designed to connect the Optical Network Unit (ONU) to the optical drop cable. This unique patented design provides the end-user the ability to configure the system with preconnectorized cables dropped at the node location. The OptiFit assembly unit is composed of two parts, the furcation unit and the fitting. The furcation unit terminates the cable with an epoxy stub and supports two to twelve fibers. The fibers are fanned out with 900 µm, 2 mm or 3 mm subunits, depending on the amount of protection needed (3 mm protection is offered on cables with two to six fibers only). The metal fitting encloses the epoxy and links the furcation unit to any hardware, providing a 5/8-inch threaded input port.
Features
FC/APC Connectors
• Eliminates additional splice points and hardware at the node location
• Provides protection against inside and outside water penetration
• Withstands pull-out force up to 400 lb
• Provides maximum clearance inside the hardware
